Setting the clock, Setting the alarm, To set the type of alarm – C. Crane CCRadio plus User Manual

Page 11: To shut off the alarm function, To set the time for the alarm to go off

Advertising
background image

Page 11

Please read this entire section carefully before you start. Set the time
with the radio off. You will need to go through the steps listed below with-
out stopping for more than 15 seconds at any given time or you will have
to start over. (Refer to page 7 for Button Identification.)

1) Press the Clock Set Button. The hour digit will flash.
2) Using the Up/Down Tuning Button, select the appropriate

hour digit and AM or PM.

3) Press the Clock Set Button again to select the minutes digits, the

minutes digits will flash. Use the Up/Down Buttons to adjust the
minutes to the appropriate time.

4) You must press the Clock Set Button again to complete the time

setting. This also sets the seconds to “00”.

S

ETTING

T

HE

C

LOCK

S

ETTING

T

HE

A

LARM

There are two different alarm modes on the CCRadio

plus

. You can

choose to wake up to the radio or to a tone. You can set the alarm with
the radio on or off.

To set the type of alarm:
Press and hold the Alarm Button until you hear a
beep and see one of these symbols flashing on the display.

To wake with the radio: While

Alarm is flashing on

the display, press the Clock Set Button until you see
the symbol shown right. When the alarm goes off the
radio will play the last station selected at the same vol-
ume level last set.

To wake with a multi level tone: While

Alarm is flashing,

press the Clock Set Button until you see the symbol
shown right.

To shut off the alarm function: Press and hold the Alarm Button until
you hear a short beep and both symbols disappear.

To set the time for the alarm to go off:
1) Press and hold the Alarm Button, the hour digit and

Alarm

symbol will flash.

2) Using the Up/Down Tuning Button, select the appropriate

hour.

3) Press the Alarm Button again. Use the Up/Down Tuning Buttons

to adjust the minute to the appropriate time.

4) Press the Alarm Button again to complete the alarm setting.

Advertising