FXpansion GURU - Manual (Page 71)

70
• [ALT] key in Pad Edit links only current Pad
layers (not all layers in Engine)
By default, holding down [ALT] while adjusting a parameter in
the Pad Edit view also adjusts that parameter for all layers in
all Pads of the current Engine. Enabling this option results in
only the layers in the current Pad being affected.
• Enable Pad/Pattern Drag & Drop move/swap/
copy
Turning on this option results in the ability to move and swap
Pads by dragging and dropping one over another, and to copy
them by doing so while holding down [ALT] and [SHIFT].
By default this option is disabled, as Pads might be changed
by mistake during playing them on-screen, or when clicking
on them to select the current Pad. This problem can be made
worse when using low-quality pointing devices.
OFF by default
OFF by default