Object detection system messages, Ride control system messages, Object detection system – GMC 2011 Acadia User Manual

Page 174: Messages -42, Ride control system

Advertising
background image

Black plate (42,1)

GMC Acadia/Acadia Denali Owner Manual - 2011

5-42

Instruments and Controls

TURN SIGNAL ON

This message displays and a chime
sounds if a turn signal is left on for
1.2 km (0.75 mile). Move the turn
signal/multifunction lever to the off
position.

Object Detection System
Messages

PARK ASST (Assist)
BLOCKED SEE OWNERS
MANUAL

If your vehicle has the Ultrasonic
Rear Parking Assist (URPA) system,
this message displays if there is
something interfering with the park
assist system. See Ultrasonic
Parking Assist on page 9‑35
for
more information.

PARK ASSIST OFF

If your vehicle has the Ultrasonic
Rear Parking Assist (URPA) system,
after the vehicle has been started
and shifted out of P (Park), this
message displays to remind the
driver that the URPA system has
been turned off or to notify the
driver that the system has turned
itself off. Press the set/reset button
or the trip odometer reset stem
to acknowledge this message
and clear it from the DIC display.
For more information see Ultrasonic
Parking Assist on page 9‑35
.

SERVICE PARK ASSIST

If your vehicle has the Ultrasonic
Rear Parking Assist (URPA) system,
this message displays if there is
a problem with the URPA system.
Do not use this system to help you
park. See Ultrasonic Parking Assist
on page 9‑35
for more information.
See your dealer for service.

Ride Control System
Messages

SERVICE STABILITRAK

This message displays if there
is a problem with the StabiliTrak

®

system. If this message appears, try
to reset the system. Stop; turn off
the engine for at least 15 seconds;
then start the engine again. If this
message still comes on, it means
there is a problem. See your dealer
for service. The vehicle is safe to
drive, however, you do not have the
benefit of StabiliTrak, so reduce
your speed and drive accordingly.

Advertising