Cuisinart PowerBlend 600 SPB-10 Series - Manual (Page 4)

4
6. Locking Ring (not shown)
Is self-aligning so that the glass blender jar slides easily
into position.
7. Heavy-Duty Motor Base
Is so sturdy and stable, it will not “walk” on your counter –
even during ice crushing!
8. 7-Speed Touchpad Control with Indicator Lights
Is easy to use, read and clean. The red LED lights clearly
indicate what blender speed you are using.
8a. Pulse at Any Speed Button
Allows you to pulse at any speed so you can blend
ingredients only as much as needed.
8b. Ice Crush Button
This button is preset to the best speed for crushed ice.
9. Slip-Proof Feet
Prevent movement during use and prevent damaging marks
on countertops or tables.
10. Cord Storage (not shown)
Keeps countertop safe and neat by conveniently storing
excess cord.
USE AND CARE
ASSEMBLY
To use your Cuisinart ®
PowerBlend 600 ™ Electronic
Blender, begin by assembling
the blender jar.
1. Turn the blender jar (a)
upside down, and place it
flat on a sturdy surface.
2. Position the rubber gasket
(b) on the round opening on
the bottom of the blender
jar.
3. Turn the cutting assembly
(c) upside down, and place
the blade end in the blender
jar opening.
4. Secure the rubber gasket and cutting assembly into position
by placing the smaller opening of the locking ring (d) on top of
the cutting assembly. Engage threads by twisting the locking
ring clockwise until tightened. Make sure locking ring is tightly
fastened to blender jar. Once assembled, turn the blender jar
right-side up.
5. Push the cover onto the top of the blender jar. Insert the
measured pour lid into the cover, aligning the tabs in the pour
lid with the slots in the cover. Twist clockwise to lock the pour
lid into the cover.
6. Place the blender jar on the motor base so that the jar
markings are facing you and the handle is positioned to one
side.
7. Plug in power cord. Your blender is now ready to be used.
HELPFUL REMINDERS
• Once the cover is in position, additional ingredients can be
added during blending: twist the measured pour lid
counterclockwise until the tabs in the pour lid align with the slots
in the cover; pull up pour lid, add ingredients, and replace the
measured pour lid.
• Cover should always be in place while the unit is on.
•
WARNING: Do not place blender jar onto base while motor
is running.
• Do not twist locking ring from blender jar when removing
blender jar from base. Simply lift blender jar from motor base.
• Boiling liquid or solid frozen foods (with the exception of ice
cubes or ½ inch [1.3 cm] pieces of frozen fruit) should never
be placed in the blender jar.
• Do not place ice, frozen foods or very cold liquids in a blender
jar which has come directly from a hot dishwasher.
• Do not place very hot liquids or foods into a blender jar which
has come directly from the freezer. Boiling liquids should cool
for 5 minutes before being placed in blender jar.
• Follow Cleaning and Maintenance instructions on page 6,
prior to your first use.
a
b
c
d