Clam Corp Fish Trap Voyager 8245 - Manual (Page 11)

11
- S t e p E i g h t -
Drape the Tent over the supported hoops then go inside and spread out the Canopy Hoop Poles, attaching
the Roof Velcro as you go.
Orient the Porch Hoop Pole so that the holes face upward and then feed the length of the pole through the
three Porch Hoop Sleeves sewn on the Tent. Slide the Porch Hoop Pole onto the Porch Poles, engaging
the third hole position.
Attach the Porch Hoop Velcro on each side of the Tent. Remove the Rear Adjustable Spreader Poles now
supporting the hoops to allow the tent to be “set” in the next step.