Installation instructions, Kl i h j – Golden Lighting 6005-BA4 RBZ User Manual

Page 2

Advertising
background image

CONNECTING THE WIRES (Fig. 2)

6. Attach the power supply wires to the fixture lead wires by

connecting BLACK to BLACK (or SMOOTH) and WHITE to

WHITE (or RIBBED).

NOTE: Twist the wires together in the same direction you twist

the wire connector onto the wires.

7. Attach the GROUND wire (GREEN or COPPER) from the

junction box and the fixture ground wire to the green ground

screw on the Mounting Bracket (A). Or, connect both wires

together using a wire connector.

8. Tuck these wire connections neatly into the junction box.

FINISHING THE INSTALLATION (Fig. 3)

9. Place the fixture Back Plate (K), over the Mounting Screws

(B), so they protrude through the holes in the Back Plate (K).

10. Thread the Deco Nuts (L) onto the Mounting Screws (B)

and continue turning until the Back Plate (K) is snug against the

wall.

11. Install glass according to the fixture assembly instructions.

YOUR INSTALLATION IS NOW COMPLETE. RETURN

POWER TO THE JUNCTION BOX AND TEST THE FIXTURE.

For Wall Mount Light Fixture

INSTALLATION INSTRUCTIONS

WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.

Fixture Name:

Lancaster 6005-BA4 PW/RBZ/AB

For Customer Service, contact the place of purchase to arrange for replacement parts.

Fig. 3

Fig. 1

Fig. 2

HANGING THE FIXTURE (Fig. 1)

1. Carefully remove the new fixture from the carton and the

yellow bag that holds all your parts. Check that all parts are

included as shown in the illustration and parts list.

2. Shut off power at the circuit breaker and remove the old

fixture from wall, including the old mounting strap.

3. The Mounting Strap (A) contains several pairs of threaded

holes. Find the pair of holes that match the hole spacing in your

fixture Back Plate (K). Thread the two Mounting Screws (B)

halfway into the Mounting Strap (A).

4. Place the Mounting Strap (A) over the Junction Box (E) so the

Mounting Screws (B) are horizontal.

5. Attach the Mounting Strap (A) to the Junction Box (E) by

using the two mounting screws (D). Tighten the screws

securely.

JUNCTION BOX

E

A

G

F

D

B

C

HOUSE WIRES

WHITE

BLACK

RIBBED (WHITE)

SMOOTH (BLACK)

FIXTURE WIRES

K

L

I

H

J

Advertising
This manual is related to the following products: