Crosley Radio Crosley Coloradio CR52 - Manual (Page 2)

Power Source
Unwind the AC power cord at the back of the unit and connect it to a power
outlet.
Radio Operation
1. Select the desired band by switching the BAND selector (10).
2. Adjust the volume level by turning the VOLUME (3) Control.
3. Select the desired station by turning the TUNING KNOB (2). Make sure the selected
band do match up with the station selected.
External Antenna
The unit is provided with a wire antenna for Fm reception. Move the wire until the
reception is clear. Do not connect the Fm antenna to any external antenna. Am reception
would be improved by relocating the unit.
Cassette Operation
1. Turn the unit on, insert a tape through the CASS DOOR (5). The tape will slide into
the cassette mechanism and start playing. The radio function will be off automatically
once the tape is in the slot.
2. Adjust the volume level by turning the VOLUME (3) Control.
3. For fast forwarding, press the EJECT / F.F. (4) half way in. By press the(4) again, will
stop the fast forwarding and return the cassette to the playing mode.
4. To stop and eject the cassette, press the EJECT / F.F. (4) in completely. The radio
operation will resume.
5. When one side of the tape finish playing, the cassette will stop and the radio will
resume.
NOTE: Remove the tape from the unit when is not in use or when listening to the radio.
Time set
Turn the Time Setting knob (8), located at the back of the unit, anticlockwise to set the
time.
NOTE: The clock will not function when the AC power is not connected.
POLARIZED ELECTRICAL PLUG
INSTRUCTIONS
This product is equipped with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature, If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact you electrician to replace
your obsolete outlet. Do not defeat the purpose of the polarized plug.
TROUBLE SHOOTING GUIDE
The unit is not functioning
* The AC power cord is not connected to a power outlet.
* The unit is not turned on : rotate the VOLUME knob from the OFF position
past the “click’’ to turn on the unit.
No radio
* The function switch is not in the correct position. Turn function switchinsert to
RADIO.
* Adjust the VOLUME knob.
* Rotate the TUNING knob to find a radio station.
Cassette tape cannot be inserted
* The cassette tape is inserted in the wrong position.
No cassette playback
* The cassette tape is not pushed all the way in.
* Adjust the volume knob.
* The cassette has reached the end of the side being played. Open cassette tape
door, take out tape, flip over the cassette and reinsert.
www.crosleyradio.com
Features
1. Speaker
2. Tuning Knob
3. Volume Control
4. Eject / F.F Button
5. Cassette Door
6. Power Connection Plug
7. Fm Antenna
8. Time Setting Knob
9. Clock display
10. Am / Fm Band Switch
10
9
8
7
6
5
4
3
2 1