Cobra Electronics 75 WX ST - Manual (Page 15)

28
CHANNEL SAVER FEATURE*
Automatically retains the last channel used when CB is turned off and
returns you to that channel when CB is turned back on.
*To function, the “red wire” must be directly connected to either:
1. Positive (+) battery terminal.
2. Connection on the fuse box that is always on.
See installation section for details.
NOTE: Leaving the 75 WX ST on after your car is turned off can drain
your car battery when connected to a constant 12 volt source.
OPERATION
CHANNEL SAVER/MEMORY CHANNELS
29
SAVING CHANNELS
IN MEMORY
1. Select desired channel to
store in memory.
2. PRESS and RELEASE the
Memory key.
3. PRESS and HOLD the
desired Memory Location
key to lock channel into
memory.
4. The Memory Location
will appear on
the display.
40
1 3 5 9
+30 SIG
0.5 1 2 3 4 PWR
AM RX
ST
RETRIEVING
CHANNELS FROM
MEMORY
1. PRESS and RELEASE the
Memory key.
2. PRESS and RELEASE
the desired Memory
Location key.
3. The channel in the
memory location will
be recalled.
4. Repeat to recall other
Memory Locations.
OPERATION
MEMORY CHANNELS