Great Planes Piper J-3 Cub 40 Kit - GPMA0160 - Manual

Great Planes ® Model Manufacturing Co. guarantees this kit to
be free from defects in both material and workmanship at the date
of purchase. This warranty does not cover any component parts
damaged by use or modification. In no case shall Great Planes’
liability exceed the original cost of the purchased kit. Further,
Great Planes reserves the right to change or modify this warranty
without notice.
In that Great Planes has no control over the final assembly or
material used for final assembly, no liability shall be assumed nor
accepted for any damage resulting from the use by the user of the
final user-assembled product. By the act of using the user-
assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the place
of purchase.
To make a warranty claim send the defective part or item to Hobby
Services at the address below:
Hobby Services
3002 N. Apollo Dr. Suite 1
Champaign, IL 61822
USA
Include a letter stating your name, return shipping address, as
much contact information as possible (daytime telephone number,
fax number, e-mail address), a detailed description of the problem
and a photocopy of the purchase receipt. Upon receipt of the
package the problem will be evaluated as quickly as possible.
READ THROUGH THIS MANUAL BEFORE STARTING
CONSTRUCTION. IT CONTAINS IMPORTANT INSTRUCTIONS
AND WARNINGS CONCERNING THE ASSEMBLY AND
USE OF THIS MODEL.
CUB4P03 for GPMA0160 V3.0 Printed in USA Entire Contents © Copyright 2003
Champaign, IL
(217) 398-8970, Ext. 5
[email protected]
INSTRUCTION MANUAL
Wingspan (Standard): 76.5 in [1,945mm]
Wingspan (Clipped): 61.5 in [1,560mm]
Wing Area (Standard): 820 sq in [58.9dm 2 ]
Wing Area (Clipped): 653 sq in [42.1dm 2 ]
Weight: 6.5-7.5 lbs [2950-300g]
Wing Loading: 18-21 oz/sq ft [55-64g/dm 2 ]
Length: 49 in [1,245mm]
Radio: 4-channel transmitter with 4 standard servos
Engine: .40-.61 cu. in. [6.5-10cc] two-stroke
.48-.80 cu. in. [8-13cc] four-stroke
USA
MADE
IN
.40 SIZE!
WARRANTY