Cooper Lighting 577 - Manual

W
ALL MOUNT
577 COOPER LIGHTING
• Die-cast aluminum
housing finished in
architectural dark bronze
polyester powder coat
• Precision aluminum
reflector/ visor system
directs light down and
out, eliminating glare
and wasted light
• Optical system is sealed
with foam-in-place
silicone gasketing
• Can be mounted to any
vertical surface. 1/2"
knockouts on side of
housing accommodate
surface-mounted conduit,
or back plate can be
mounted to 4" octagonal
J-box
• Prismatic borosilicate
glass refractor provides
excellent beam
distribution without
lens yellowing
• U.L. listed for wet
locations. CSA certified
• Approximate net weight:
18 lbs. (8 kgs.)
COOPER LIGHTING - LUMARK ®
GP
GLASS-PAK
3 5 - 1 7 5 W
H i g h P r e s s u r e S o d i u m
M e t a l H a l i d e
W A L L M O U N T
L U M I N A I R E
D I M E N S I O N S D E S C R I P T I O N
The Lumark Glass-Pak is
constructed of premium
die-cast aluminum and
features a borosilicate glass
lens. U.L. listed for wet
locations. CSA certified.
NOTES: 1 All lamps are medium-base. 2 35W is HPS only, 120V only. 3 Products also available in non-US voltages and 50Hz for international markets. Consult factory
for availability and ordering. 4 480V not available in 35 or 50W. 5 Dual-Tap ballasts are 120/277V wired 277V. 6 Multi-Tap ballasts are 120/208/240/277V wired
277V. 7 Triple-Tap ballasts are 120/277/347V wired 347V. 8 Add as suffix in the order shown. 9 Lamp is shipped separate from luminaire. Lamp is Cooper
designated product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 10 Order separately. 11 Consult your Cooper
Lighting Representative for availability and ordering information. 12 Specifications and dimensions subject to change without notice.
M O U N T I N G D E T A I L
Options 8
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
PE=Internal Photocontrol
TR=Tamper Resistant Screws
LL=Lamp Included
9
WHT=White Finish
Accessories 10
PE/MT=Field Installed Photocontrol (Specify voltage)
TRSD-8/32=Tamper-Resistant Screwdriver
PE-480V=480V Photoelectric Control
PE-347=Field Installed Photocontrol, 347V
UB-U Universal BKT=Universal Mounting Bracket
WG/GP-GS=Wire Guard
O R D E R I N G I N F O R M A T I O N
S A M P L E N U M B E R : M H G P - 1 7 5 H - M T- L L
Lamp Type
HP=High Pressure
Sodium
MH=Metal Halide
Series
GP=Glass-Pak Lamp Wattage 1
35=35W 2
50=50W
70=70W
100=100W
150=150W
175=175W
Power Factor
__=NPF
H=HPF Voltage 3
120V
208V
240V
277V
347V
480V
4
DT=Dual-Tap 5
MT=Multi-Tap 6
TT=Triple-Tap 7
Options &
Accessories
(See Below)
6 3/4"
[171mm]
10"
[254mm]
7"
[178mm]
2 1/2"
square
[64mm]
6 1/4"
[159mm]
7/8" diameter
[22mm]
9 3/16"
[233mm]
LAMP TYPE WATTAGE
Metal Halide 50, 70, 100, 150W
High Pressure Sodium 35, 50, 70, 100, 150, 175W