Great Planes Piper J-3 ElectriCub Park Flyer ARF - GPMA1153 - Manual (Page 6)

6
Kit Contents
1. L and R Wing Panels
2. Fuselage
3. Stab and Elevator
4. Fin and Rudder
5. Landing Gear
6. Wheels (2)
7. Propeller
8. Cowl
9. Motor
10. Hardware Bag
11. Parts Bag
12. Servo Tray
13. Pushrods (2)
Kit Contents (not photographed)
(1) Tail Skid
(2) Wing Dowel Rods
(2) Nylon Control Horns with Back Plates
(4) 2 x 10mm Machine Screws
(1) Wooden Landing Gear Brace
(4) 2 x 5mm Washer Head Self- Tapping Screws
(1) 2 x 8mm Washer Head Self- Tapping Screw
(1) Battery Cover Latch
(2) 2 x 6mm Round Head Self-Tapping Screws
(2) Knurled Nuts (2) Quick Connect Posts
(2) 2.8 x 5mm Machine Screws
(1) Electronic Speed Control
(2) Nylon Tie Straps
Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they are of
acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly, contact
Great Planes Product Support. When reporting defective or missing parts, use the part names exactly as they are written in
the Kit Contents list on this page.
Great Planes Product Support:
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: [email protected]
KIT CONTENTS
To convert inches to millimeters, multiply inches by 25.4
1 1
2
4
5
7
8
3
11 10
13
6
9 12