Haltech Wideband 02 Controller Manual - Manual

Haltech Wideband Controller
(HWC)
Manual
Warning!
The Oxygen Sensor used in this device gets very hot in operation.
Do not touch the hot sensor. Do not let a hot sensor touch a
combustible surface. Do not use the sensor with or near flammable
liquids or gases. Failure to heed these warnings may result in severe
burns, explosions or fires.
When installed in the exhaust, the oxygen sensor MUST be
connected and operating whenever the car is running. An un-
powered oxygen sensor will be quickly damaged when exposed to
hot exhaust gases.
Haltech_Wide_Band_Manual_1.0.doc