Heckler&Koch MR762A1-LRP - Manual (Page 13)

24 25
Fig. 25 – Drift out the Firing Pin Retaining Pin and lift up on the Drop Safety
d. Lift up on the spring-loaded drop safety (firing pin safety) and remove the firing pin
and firing pin spring (Fig. 25 and Fig. 26).
Fig. 26 – Removing the Firing Pin and Firing Pin Spring from the Bolt Assembly
e. Lift up and remove the cam pin from the shaft of the bolt head (Fig. 27).
Fig. 27 – Remove the Cam Pin
f. Slide the bolt head from the front of the bolt carrier (Fig. 28).
Fig. 28 – Slide the Bolt Head out
g. Further disassembly of the bolt head, including removal of the extractor is not
recommended (Fig. 29).
Fig. 29 – Bolt Head
Fig. 30 – Bolt Assembly Components
CAUTION: Removal of the MR762A1 extractor and the ejectors by the operator is
not recommended.