Heli-Max HMXE0805 Manual - Manual (Page 7)

7
INSTALL THE TRANSMITTER BATTERIES INSTALL THE TRANSMITTER BATTERIES
❏ Remove the battery
cover from the back of the
transmitter, remove the
battery box and install eight
(8) “AA” batteries into
the battery box. Double-
check the polarity of each
battery before placing the
battery box back into the
transmitter and replacing
the battery cover.
❏ Turn on the transmitter
using the power switch as
shown above and verify that
the indicator illuminates.
Turn the transmitter off
for now. If the indicator
did not illuminate, remove
the battery box from the
transmitter and verify that
the batteries were installed
correctly.