Heli-Max HMXE0805 Quick Start - Manual (Page 2)

❑ 5. Connect the fl ight battery to the ESC. ❑ 6. Position throttle stick in lowest position.
❑ 7.Turn the transmitter on.
❑
8. Wait while the transmitter binds to the receiver (the logo on the
transmitter will quit fl ashing).
❑ 9. Leave the helicopter still for 5 seconds so the gyro can perform
the initialization process.
A safe start is built into the Novus Helicopter that prevents the motor from activating
unless the collective stick has been lowered to the lowest position. If the motor won’t
run and turn the main blades, please make sure the collective stick is all the way down
and leave it there for a couple of seconds. Then try moving the stick up slowly.
❑
10. Transmitter Controls:
Your Novus AH-1J SeaCobra is now ready to fl y. Please refer to the fl ying instructions on
page 15 in the manual before operating the model.
❑ 5. Connect the fl ight battery to the ESC. ❑ 6. Position throttle stick in lowest position.
❑ 7.Turn the transmitter on.
❑
8. Wait while the transmitter binds to the receiver (the logo on the
transmitter will quit fl ashing).
❑ 9. Leave the helicopter still for 5 seconds so the gyro can perform
the initialization process.
A safe start is built into the Novus Helicopter that prevents the motor from activating
unless the collective stick has been lowered to the lowest position. If the motor won’t
run and turn the main blades, please make sure the collective stick is all the way down
and leave it there for a couple of seconds. Then try moving the stick up slowly.
❑
10. Transmitter Controls:
Your Novus AH-1J SeaCobra is now ready to fl y. Please refer to the fl ying instructions on
page 15 in the manual before operating the model.
Copyright © 2009 HMXE0805 Quick Start Copyright © 2009 HMXE0805 Quick Start