Heli-Max HMXE08 Quick Start - Manual (Page 2)

❑ 5. Position throttle stick in lowest position.
❑ 6. Place the model on a fl at surface and
turn the transmitter on. You will notice that
the trim tab indicators are moving and the
navigation lights on the helicopter remain
solid. This is an indication of the linking
process. Allow the helicopter to remain
still and do not move the transmitter sticks
during the linking process.
Two loud tones will be emitted from the
transmitter. After a couple of seconds the
navigation lights will begin fl ashing rapidly.
This indicates that the binding process is
taking place. The tail navigation light will stop
fl ashing and the anti-collision beacon on top
of the helicopter will begin operating. This
indicates that the transmitter and helicopter
have bound properly and the helicopter is
now ready for fl ight. Always step 15 feet
[4.5m] away from the Novus Helicopter
before operating the throttle.
❑ 5. Position throttle stick in lowest position.
❑ 6. Place the model on a fl at surface and
turn the transmitter on. You will notice that
the trim tab indicators are moving and the
navigation lights on the helicopter remain
solid. This is an indication of the linking
process. Allow the helicopter to remain
still and do not move the transmitter sticks
during the linking process.
Two loud tones will be emitted from the
transmitter. After a couple of seconds the
navigation lights will begin fl ashing rapidly.
This indicates that the binding process is
taking place. The tail navigation light will stop
fl ashing and the anti-collision beacon on top
of the helicopter will begin operating. This
indicates that the transmitter and helicopter
have bound properly and the helicopter is
now ready for fl ight. Always step 15 feet
[4.5m] away from the Novus Helicopter
before operating the throttle.
© 2010 Hobbico ® Inc. HMXE0808 Quick Start © 2010 Hobbico ® Inc. HMXE0808 Quick Start
Your Novus helicopter has a safe start feature built in that prevents the motor from
activating unless the collective stick has been lowered to the lowest position. If the
motor won’t run and turn the main blades, please make sure the collective stick is all the
way down and leave it there for a couple of seconds. Then try moving the stick up slowly.
❑
7. Transmitter Controls:
Helicopter Climbs Helicopter Climbs Helicopter Climbs Helicopter Moves Forward Helicopter Moves Forward Helicopter Moves Forward
Nose Rotates Left Nose Rotates Left Nose Rotates Left Helicopter Moves Left Helicopter Moves Left Helicopter Moves Left
Your Novus UH-1D Huey is now ready to fl y. Please refer to the fl ying instructions on page
15 in the manual before operating the model.
Your Novus helicopter has a safe start feature built in that prevents the motor from
activating unless the collective stick has been lowered to the lowest position. If the
motor won’t run and turn the main blades, please make sure the collective stick is all the
way down and leave it there for a couple of seconds. Then try moving the stick up slowly.
❑
7. Transmitter Controls:
Helicopter Climbs Helicopter Climbs Helicopter Climbs Helicopter Moves Forward Helicopter Moves Forward Helicopter Moves Forward
Nose Rotates Left Nose Rotates Left Nose Rotates Left Helicopter Moves Left Helicopter Moves Left Helicopter Moves Left
Your Novus UH-1D Huey is now ready to fl y. Please refer to the fl ying instructions on page
15 in the manual before operating the model.