P153), Brightness control – HONDA 2015 Odyssey - Owner's Manual User Manual

Page 154

Advertising
background image

153

uu

Operating the Switches Around the Steering Wheel

u

Brightness Control

Co
ntrols

Brightness Control

When the parking lights are turned on and the
ignition switch is in ON

(

w

*1

, you can use the

brightness control knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.

You will hear a beeper when the brightness
reaches minimum or maximum. The
information display

*

/multi-information

display

*

will return to its original state several

seconds after you adjust the brightness.

Brightness level indicator

The brightness level is shown on the
information display

*

/multi-information

display

*

while you are adjusting it.

*1: Models with the smart entry system have an
ENGINE START/STOP button instead of an ignition
switch.

1

Brightness Control

Instrument panel brightness varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.

Pressing the

(Select/Reset) knob or the

/

(information) button

*

changes to a different display.

If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
exterior lights are on.

Control Knob

On multi-information display

On information display

* Not available on all models

15 US ODYSSEY-31TK86400.book 153 ページ 2014年7月1日 火曜日 午後2時4分

Advertising