HONDA 2014 Civic Hybrid - Owner's Manual - Manual (Page 304)

303
uu Replacing Light Bulbs u Rear Turn Signal Light Bulbs
Main
tenan
ce
Rear Turn Signal Light Bulbs
When replacing, use the following bulbs.
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket to the left and remove it.
Remove the old bulb.
3. Insert a new bulb.
Brake/Taillight and Rear Side Maker Bulbs
Brake/rear taillight and rear side marker bulbs are LED type. Have an authorized
Honda dealer inspect and replace the light assembly.
Rear Turn Signal Light: 21 W (Amber)
1 Rear Turn Signal Light Bulbs
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
Clip
Push until the
pin is flat
Lining
Clip
Bulb Socket
14 CIVIC IMA-31TR26200.book 303 ページ ２０１３年１２月２３日 月曜日 午後４時９分