HONDA 2014 CR-Z - Owner's Manual User Manual
Page 286
Continued
285
uu
If a Tire Goes Flat
u
Temporarily Repairing a Flat Tire
Han
d
lin
g the U
n
expected
10. Unplug the power plug from the accessory
power socket.
u
Handle the compressor and the power
plug carefully. They may be hot in
operation.
11. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
12. Press the pressure relief button until the
gauge returns to 0 psi (0 kPa).
13. Apply the repair notification label to the
flat surface of the wheel.
u
The wheel surface must be clean to
ensure the label adheres properly.
1
If the required air pressure is not reached within 10
minutes, the tire may be too severely damaged for
the kit to provide the necessary seal and your vehicle
will need to be towed.
See a Honda dealer for a replacement sealant bottle
and proper disposal of an empty bottle.
Sealant/Air Hose
Valve
Stem
Repair
Notification
Label