HONDA 2012 Crosstour - Owner's Manual - Manual (Page 355)

Pull down the under cover from
the bumper carefully.
Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
Remove the bulb by turning it
about one-quarter turn
counterclockwise.
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustment should be done by your
dealer or another qualified
technician.
Remove the three holding clips
with a flat-tip screwdriver.
1.
2.
3.
CONTINUED
Passenger’s side
Replacing a Fog Light Bulb
Lights
351
ELECTRICAL
CONNECTOR
TAB
UNDER COVER BULB
HOLDING CLIPS Halogen light bulbs get very hot when
lit. Oil, perspiration, or a scratch on
the glass can cause the bulb to overheat
and shatter.
Ma
int
e
na
nce
2012 Crosstour