HONDA 2007 Accord Sedan - Owner's Manual - Manual (Page 221)

Push the electrical connector onto
the bulb. To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver’s side bulb, turn
the steering wheel to the right. Pull the inner fender cover away
from the fender and bumper.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Remove the electrical connector
from the bulb by squeezing the
connector to unlock the tab, then
slide the connector off the bulb. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
Turn on the headlights to test the
new bulb.
Reinstall the air intake cover.
Reinstall the two fasteners and
secure them by pushing on the
heads until they lock.
6.
5. 3.
4.
5.
1.
2.
7.
Lights
Low Beam Headlight
220
HOLDING CLIPS
TAB
BULB
V6 models
BULB
Main Menu Table of Contents s t Main Menu ▲ ▼