Power windows – HONDA 2004 CR-V - Owner's Manual User Manual

Page 90

Advertising
background image

Turn the ignition switch to ON (II)
to raise or lower any window. To
open the window, push the switch
down and hold it. Release the switch
when you want to stop the window.
Pull back on the switch and hold it to
close the window.

To open/close the driver’s

window, push the window switch
firmly down or up to the second
detent, and release it. The window
will automatically go up or down all
the way. To stop the window, pull/
push on the window switch briefly.

If the MAIN switch is OFF, the
passenger windows cannot be raised
or lowered. Keep the MAIN switch
off when you have children in the
vehicle so they do not injure
themselves by operating the
windows unintentionally.

If the driver’s

window runs into any obstacle while
it is closing automatically, it will
reverse direction and then stop. To
close the window, remove the
obstacle, then use the window switch
again.

Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.

AUTO

AUTO REVERSE

Power Windows

Instruments and Controls

86

DRIVER’S WINDOW SWITCH

MAIN SWITCH

Closing a power window on
someone’s hands or fingers can
cause serious injury.

Make sure your passengers are
away from the windows before
closing them.

Main Menu

Table of Contents

Advertising