HONDA 2002 Accord Coupe - Owner's Manual - Manual (Page 273)

Spark Plug Gap:
Install the spark plug cap.
Repeat this procedure for the
other three spark plugs.
Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque: Put the new spark plug into the
socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it. 5.
6.
7.
NGK:
DENSO:
4.
Specif ications:
Spark Plugs (4-cylinder Models)
Maintenance 270
0.04 in (1.1 mm) 13 lbf·ft (18 N·m , 1.8 kgf·m)
PZFR5F-11
PKJ16CR-L11
0
0.1 mm
Tighten the spark plugs carefully. A
spark plug that is too loose can
overheat and damage the engine.
Overtightening can cause damage to
the threads in the cylinder head.
Main Menu Table of Contents