HONDA 2000 Civic Coupe - Owner's Manual - Manual (Page 211)

Lights
Replacing Rear Bulbs (in Trunk
Lid)
1. Open the trunk.
2. Use a Phillips-head screwdriver to
remove the two screws from the
bulb holder. Remove the holder
from the taillight assembly.
3. Determine which of the two bulbs
is burned out: stop/taillight/side
marker or back-up light.
4. Remove the socket by turning it
one-quarter turn counterclockwise.
5. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
6. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
7. Test the lights to make sure the
new bulb is working.
8. Reinstall the bulb holder assembly.
Install the screw and tighten it
securely.
Maintenance
SCREW
Main Menu Table of Contents