Spark plugs – HONDA 2000 Odyssey - Owner's Manual User Manual
Page 258
Advertising
Spark Plugs
3. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
4. Use a wrench to remove the
hexagon socket head cap bolt
holding the ignition coil. Remove
the ignition coil by pulling it
straight out.
5. Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
6. Put the new spark plug into the
socket; then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
CONTINUED
Maintenance
HEXAGON SOCKET HEAD CAP BOLT
Main Menu
Table of Contents
Advertising