Indicator lights – HONDA 2000 CR-V - Owner's Manual User Manual
Page 58
Indicator Lights
Low Oil Pressure
Indicator
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
Charging System
Indicator
If this light conies on when the
engine is running, the battery is not
being charged. For complete
.
Malfunction Indicator
Lamp
See page
.
Parking Brake and
Brake System
Indicator
This light has two functions:
1. It lights as a reminder that you
have not released the parking
brake. Driving with the parking
brake applied can damage the
brakes and tires, and cause the
ABS to turn off (see page
).
2. If it remains lit after you release
the parking brake while the engine
is running, or comes on while
driving, it can indicate a problem
in the brake system. For complete
Supplemental Restraint
System Indicator
This indicator lights when you turn
the ignition switch ON (II). If it
comes on at any other time, it
indicates a problem in the
supplemental restraint system. For
complete information, see page
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
Instruments and Controls
U.S.
Canada
BRAKE
SRS
Main Menu
Table of Contents