IC Realtime Professional 3-D DVR/PTZ Keyboard with Network Capability - Manual (Page 29)

29
Scan Value ：1
Scan setup ＞ start
Versatile scan Stop
Random scan Speed
Note: for versatile scan and random scan, you need corresponding
protocols to support.
6.3.4 Tour
6.3.4.1 Tour setup
Use up/down keys to highlight add to tour. Input value in tour group.
For example, here we want to add tour point 2 and 3 in tour group 1.
• Firstly, input 1 in tour group.
• Secondly, input 2 to tour and then click ENTER.
Now you have added tour point 2 to tour group 1.
• Thirdly, input 3 to tour and then click ENTER.
Now you have added tour point 3 to tour group 1.
You can repeat the above procedures to add more tour point.
6.3.4.2 Tour operation
• Speed
Please use up/down keys to highlight tour setup.
When cursor is before speed, you can input speed value.
• Duration
Use left/right keys to highlight duration and then you can input interval value.
• Begin
touring
Use up/down to highlight tour and then input value.
Now you can click ENTER to begin tour.
• Stop touring
Move cursor to highlight stop and then click ENTER. Now you have stopped
touring
6.3.4.3 Remove
6.3.4.3.1 Remove tour
Move cursor to highlight remove tour and
then input corresponding value.
Click ENTER to delete current tour.
6.3.4.3.2 Remove tour point
• Move cursor to highlight tour group and then input corresponding
value.
• Please click Enter to confirm all the operation below is active to
current tour group.
•
Move cursor to highlight tour point and input corresponding value
(such as 2).
• Now click ENTER to delete.
For example, you want to remove tour point 5 and 6 from tour group 2.
• Firstly, input 2 in tour group and click ENTER.
• Secondly, input 5 in tour point and click ENTER. Now you have
deleted tour point 5.
•
Thirdly, input 6 in tour point and click ENTER. You have deleted
tour point 6.
6.3.5 PATTERN
6.3.5.1 Pattern setup
• Move cursor to highlight pattern and then input pattern value.
Tour
Tour setup ＞ Tour group：1
Add to tour Tour：
Remove tour
Tour Value ：1
Tour setup ＞ Start
Add to tour Stop
Remove tour
Tour Value ：1
Tour setup ＞ Speed
Add to tour Duration
Remove tour Remove tour group
Tour
Tour setup ＞ Tour group：1
Add to tour point Tour point：
Remove tour point
Tour Value ：1
Tour setup Speed
Add to tour Duration
Remove tour ＞ Remove tour group