Important safeguards and warnings – IC Realtime 1.3 Megapixel 18X PTZ Network Camera (ICIPMP1801S) User Manual
Page 5
5
Important Safeguards and Warnings
1
．Electrical safety
z
All installation and operation here should conform to your local electrical safety codes.
z
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the
Limited power source is rated 24V AC in the IEC60950-1.
z
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
z
We are not liable for any problems caused by unauthorized modification or attempted repair.
2
．Transportation Security
z
No heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
z
Please use the original packing material (or the material of the same quality) when you ship it back
to the manufacturer.
3
．Installation
z
Do not apply power to the product before completing installation.
z
Do not put object on the product.
4
．Environment
z
This series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
z
Please keep it away from the electromagnetic radiation object and environment.
z
Please keep the sound ventilation.
z
Do not allow the water and other liquid falling into the device.
z
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
5. Daily Maintenance
z
Current series product has no power button. Please unplug all corresponding power cables before
your begin installation or daily maintenance work.
z
Please keep the dustproof cap back to protect the CCD or CMOS part if the device does not work
for a long time.
z
Do not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of
the device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
z
Do not use the volatility solvent such as the benzene or thinner, or detergent with strong
abradibility. It may result in lens damage or it may adversely affect the device performance.
z
If there is too much dust, please use the water to dilute the mild detergent first and then use it to
clean the device. Finally use the dry cloth to clean the device