Web gui operation, A network connection, B logging in, and main interface – IC Realtime 1.3Mp HD Cost-effective Network IR PTZ Dome Camera (ICIPM2008IR) User Manual
Page 15: Chapter
I C R E A L T I M E S E C U R I T Y S O L U T I O N S
12
Web GUI Operation
This section outlines how to assign an IP address to the camera, and how to access and
control the IPC via it’s built in Web Ineterface.
3.a Network Connection
Step 1: Ensure the Camera is physically connected to your Network, and Powered ON.
Patch the IP Camera into your network with a standard Ethernet cable. Provide the camera with the required
24V AC power source. Only use the supply that comes with the camera!
Step 2: Assign an IP address to the IP Camera.
The ICIP-MP2008IR Series camera (and all ICR IP Cameras) have a factory default static IP address of
'192.168.1.108'. If this matches the same subnet as your LAN, you will be able to login to the camera by typing
this address into your browser (assuming that the IP address does not conflict with another device on your
network).
Alternatively, you can use our IP Auto Search utility to rapidly find and change IP addresses for IC Realtime
series IP Cameras. The utility is available on our support page at :
3.b Logging In, and Main Interface
Step 1: Open up your Web Browser (Safari, Chrome, Firefox, or IE) and input the IP address
of your IP camera.
In Example, open Safari and browse to
Chapter
3