IC Realtime 2Mp 30x Optical Zoom Full HD Network PTZ Dome Camera with 300ft IR (ICIP3001HDIR) - Manual (Page 30)

24
IR SENSITIVITY: 04
IRLIGHT CTRL: ZOOM PRI (HEIGHT PRI, MANUAL)
NEAR LIGHT: 50
FAR LIGHT: 50
IRLIGHT COMP: 03
BACK
EXIT
POWER UP ：1
PARAMTER ：OFF
BACK
EXIT
• POWER UP: It is to set the PTZ operation when the speed dome boots up. The option includes:
NONE/AUTO/SCAN/PRESET/PATTERN/TOUR and etc. Please use the left/right button to set.
• PARAMTER: Here you can set the serial number of the corresponding operation such as the scan,
preset, pattern, tour. Please use the left/right button to set.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
Menu Password
Move the cursor to the MENU PASSWORD and the click the confirm button to go to the fourth menu.
• PASSWORD: It is to set the speed dome menu password. Please use the left/right button to set.
• SETTING: Click the confirm button to go to the password setup interface. Please use the left/right
button to set the value and then click the confirm button to confirm current option. Move the cursor to
the SAVE button and then click the confirm button to save current setup. Click the BACK button to
go to the previous menu.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
If you have forgot your password. After three times of login failure, system may pop up an 8-digit
internal code. Please contact our technical engineer for help.
4.4.5 IR Light Setup
Move the cursor to highlight IR LIGHT SETTING button and then click confirm button.
z
IR SENSITIVITY: Here you can enable the IR light sensitivity function.
z IR LIGHT CTRL: There are three options: Zoom rate has the higher priority; height has the higher
priority, and manual. Please use the left/right button to set.
z NEAR LIGHT: It is the medium and near light brightness. This function is valid in MANUAL mode.
z FAR LIGHT: It is the far light brightness. This function is valid in MANUAL mode.
z IR LIGHT COMPENSATION: It is the whole compensation level of the IR light. This function is valid
when the zoom rate has the higher priority.
z BACK: Go back to the previous menu.
z EXIT: Log out the system menu.
PASSWORD ：
SETTING ：
BACK
EXIT
PASSWORD：
1 2 3 4 5
6 7 8 9 0
→ SAVE BACK