Corsair Padlock 2 - Manual (Page 4)

4
Unlock with Master pIn
Unlocking your Flash Padlock with a master PIN will erase the user PIN setting. The content on the drive will not be
deleted and the drive will not be secure.
DIrEctIonS ExpLAnAtIon
1. Double press KEY button. Green and red LEDs will double blink.
2. Enter master PIN using PIN keys.
3. Press and release KEY button. Green LED will double blink.
4. Drive is now unlocked and unsecure and user PIN has been reset.
troubleshooting
Dead Battery
Your Flash Padlock comes with an internal battery. If the internal battery is fully discharged, you may still continue
using your Flash Padlock.
1. Connect your Flash Padlock to a USB port on any computer.
2. Enter a user or master PIN on your Flash Padlock to unlock the drive, while your drive is connected to the
computer.
The internal battery will automatically charge when connected to a USB port on your computer. We recommend
keeping your Flash Padlock connected to your computer for 1 hour to fully charge the internal battery.
Lost your User pIn? (no Master pIn Set)
If you lose your user PIN, you’ll need to reset the Flash Padlock, but all the data on the drive will be completely
erased. If you have a Master PIN set, then please proceed to section below to recover use of your drive without
erasing your stored data.
1. Press and hold KEY and 0/1 buttons simultaneously for 3 seconds.
2. notE ALL DAtA WILL BE LoSt Upon coMpLEtIon oF tHIS StEp. Enter 9-1-1 using the PIN keys and then
press the KEY button. The Flash Padlock will now be unlocked and all data will be lost.
3. Connect Flash Padlock to a USB port and format the drive
4. Your user PIN has been erased and your Flash Padlock is unlocked. Please set a new PIN to secure your data.
Lost your User pIn (Master pIn Set)
If your Flash Padlock has a master PIN, you may recover the use of your drive and gain access to your data.
1. Double press the KEY button.
2. Enter master PIN using key PIN keys.
3. notE USEr pIn WILL BE DELEtED Upon coMpLEtIon oF tHIS StEp, BUt tHE DAtA WILL StILL BE
AVAILABLE. Press KEY button.
4. Your drive will be unlocked and ready for use.
We recommend resetting your user PIN to secure the data on your drive. The drive will stay unlocked and your data
will not be protected until a user PIN is created.
Hacking Detection
After 5 unsuccessful user PIN entry attempts, your Flash Padlock will be disabled for 2 minutes. The red LED will
blink to indicate the unit has been locked. After 2 minutes, you can attempt to unlock your Flash Padlock.
For More Information
You can find a frequently updated list of questions and answers at www.corsair.com/faq. Or, you can visit the
support section of our web site at www.corsair.com.
© 2010, Corsair Memory, Inc. All rights reserved. Corsair, the Corsair logo, and other Corsair marks are owned by Corsair and may be registered. All other trademarks are the
property of their respective owners. Corsair assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.