ILY USB Mini Portable USB Duplicator - Manual (Page 9)

1. Insert Flash devices into duplicatorÆSelect [4. Utility ]ÆPress [OK]ÆSelect [4.4 Format
FAT]ÆPress [OK]ÆSystem formats the Flash devices
2. Press [Forward]/[Backward] to check other Flash devices’ format statusÆ Press [ESC] to finish.
4.5 Measure Speed
This function measures a Flash device’s read and write speed.
Check Flash device’s speed Steps:
1. Insert Flash devices into duplicatorÆSelect [4. Utility ]ÆPress [OK]ÆSelect [4.5 Measure
Speed]ÆPress [OK]ÆSystem checks the Flash devices speed.
2. Press [Forward]/[Backward] to check other Flash devices’ speedÆ Press [ESC] to finish.
4.6 Erase Content
This function erases a Flash device’s data content, it will not erase Flash FAT16/32 format. If format is
not FAT16/32, the quick erase will not execute.
**The source port (port #1) does not execute erase function.
Erasing Flash device’s content Steps:
1. Insert Flash devices into duplicatorÆSelect [4. Utility ]ÆPress [OK]ÆSelect [4.6 Erase
Content]ÆPress [OK]ÆSystem quickly erases the data on Flash devices
2. Press [Forward]/[Backward] to check other Flash devices’ erasing statusÆ Press [ESC] to finish.
4.7 System Info.
This function shows the basic information of this system, which includes model number and firmware
version.