Interlogix Simon XTi CDMA Module V4 - Manual

P/N 466-2874 • REV B • 06MAR13
Simon XT/XTi CDMA Module V4 Installation
Instructions
Content
Contact information ...........................................................
Introduction........................................................................
Compatibility ......................................................................
Account Creation ...............................................................
Installation..........................................................................
Power Up...........................................................................
CDMA Phone Test (Module Registration).........................
Troubleshooting: Module Status Information....................
Troubleshooting: LEDs .....................................................
LED Details .......................................................................
Various Module States (modes)........................................
Improving wireless signal strength ....................................
Interactive Menus ...............................................................
Walking the Customer through New User Setup on the Web
.............................................................................
Specifications....................................................................
Regulatory information......................................................
Contact information
For additional information and support on Alarm.com products
and services, please visit
www.alarm.com/dealer or contact
Alarm.com technical support at 1-866-834-0470.
© 2013 UTC Fire & Security Americas Corporation, Inc.
Interlogix is part of UTC Climate Controls & Security,
a unit of United Technologies Corporation.
All rights reserved.
Copyright © 2013 Alarm.com. All rights reserved.
Introduction
The CDMA Module V4 for Simon XT and XTi enables wireless
reporting of all alarms and other system events from the Interlogix
Simon XT & XTi control panel using the CDMA wireless (cellular)
network. The module can be used as the primary communication
path for all alarm signaling, or as a backup to a telephone line
connection to the central monitoring station. The wireless alarm
signaling and routing service is operated by Alarm.com. The V4
module also features integrated support for Alarm.com’s
emPower
TM solution with built-in Z-Wave capabilities.
The module interfaces with the Simon XT/XTi panels, fits into a
special compartment inside the panel, and is powered by the
control panel and panel battery.
Compatibility
The CDMA V4 module is compatible with the Simon XT and XTi
control panels.
Account Creation
Before installing the Alarm.com CDMA Module in a Simon XT or XTi
system, a new customer account needs to be created with
Alarm.com. We recommend creating the account at least 24
hours in advance of installation to ensure that the radio is
activated prior to installation.
To activate an account go to www.alarm.com/dealer and login.
Under the “Customers” heading at the top left of the page click on
“Create New Customer”. You will need the following customer
information to create the account:
• Customer Name
• Customer Address
• Customer Phone Number
• Customer E-mail
• Preferred login name for the customer
• Alarm.com Module Serial Number
At the end of the account creation process you will be able to print
a Welcome Letter for the customer that has their login information
and temporary password for the Alarm.com website.
Installation
Installation consists of inserting the module into the panel,
attaching the antenna, and performing a CDMA phone test at the
panel.
Follow these guidelines during installation:
1
1
1
1
1
3
3
3
4
4
5
6
6
9
9
9