2 wall mount plate mounting – Interlogix MC350-4T-2S User Manual
Page 23
Advertising
2.2.2 Wall Mount Plate Mounting
To install the Industrial Gigabit Ethernet Switch on the wall, please follow the instructions described below.
Step 1:
Remove the DIN-Rail from the Industrial Gigabit Ethernet Switch; loose the screws to remove the
DIN-Rail.
Step 2:
Place the wall mount plate on the rear panel of the Industrial Gigabit Ethernet Switch.
Step 3:
Use the screws to screw the wall mount plate on the Industrial Gigabit Ethernet Switch.
Step 4:
Use the hook holes at the corners of the wall mount plate to hang the Industrial Gigabit Ethernet Switch on the wall.
Step 5:
To remove the wall mount plate, reverse steps above.
Advertising