Cambridge Audio 510D User Manual
Page 2
2
Safety & Regulatory Information
The following sections contain notices for various
countries:
CAUTION: This device is intended to be connected by
the user to a CSA/TUV/UL certified/listed IBM AT or
compatible personal computer in the manufacturer’s
defined operator access area. Check the equipment
operating/installation manual and/or with the equipment
manufacturer to verify/confirm if your equipment is
suitable for devices.
Modifications
Any changes or modifications not expressly approved by
the manufacturer of this device could void the user’s
authority to operate the device.
Compliance
This product conforms to the following Council
Directive:
❑
Directive 89/336/EEC, 92/31/EEC (EMC),
73/23/EEC (LVD), (73/23/EEC), as amended by directive 93/
68/EEC.
Important Notice
The serial number for the MegaWorks 510D is located on
the subwoofer. Please write this number down and keep
it in a secure area. This is for your security.
CAUTION
Take care to prevent accidental operation of your new
loudspeaker system at excessive sound pressure levels!
In a typical personal computer installation, the
MegaWorks 510D satellite speakers are less than a meter
from the listener.
If you do not hear sound from your new speaker, keep
the MegaWorks 510D's volume control at 40% of its
rotation range (the 11:o'clock position,approxmately)
until you hear sound. This will prevent accidental
operation at uncomfortably loud levels.
WARNING: To prevent fire or
shock hazard, do not expose this
appliance to rain or moisture.