Interlogix NS3502-8P-2S User Manual - Manual (Page 333)

IFS NS3502-8P-2S User Manual
333
The page includes the following fields:
Object Description
• Profile Set the schedule profile mode. Possible porifles are:
Profile1
Profile2
Profile3
Profile4
• Week Day Allows user to set week day for defining PoE function should be
enabled on the day.
• Start Hour Allows user to set what hour does PoE function enables.
• Start Min Allows user to set what minute does PoE function enables.
• End Hour Allows user to set what hour does PoE function disables.
• End Min Allows user to set what minute does PoE function disables.
• Reboot Enable Allows user to enable or disable whole PoE port reboot by PoE
reboot schedule. Please be noticed that if you want to PoE schedule
and PoE reboot schedule work at the same time, please use this
function, and don’t use Reboot Only function.
This function offers administrator to reboot PoE device at indicate
time if administrator has this kind of requirement.
• Reboot Only Allows user to reboot PoE function by PoE reboot schedule. Please
notice that if administrator enables this function, PoE schedule will
need to set time to profile. This function is just for PoE port reset on
the indicated time.
• Reboot Hour Allows user to set what hour PoE reboots. This function is only for
PoE reboot schedule.
• Reboot Min Allows user to set what minute PoE reboots. This function only for
PoE reboot schedule.
Buttons
: click to add new rule.
: Click to save changes.
: Check to delete the entry.