Interlogix NS3702-24P-4S User Manual - Manual (Page 350)

350
The page includes the following fields:
Object Description
 System PoE Admin
Mode
Allows user enable or disable PoE function. It will causes all of PoE ports supply
or not supply power.
 PoE Temperature
Protection
Allows user enable or disable PoE Temperature Protection.
 PoE Management
Mode
There are Six modes for configuring how the ports/PDs may reserve power and
when to shut down ports.

Class-Consumption mode: System offers PoE power according to PD real
power consumption.

Class-Reserved-Power mode: System reserves PoE power to PD
according to PoE class level.

Allocation-Consumption mode: System offers PoE power according to PD
real power consumption.

Allocation-Reserved-Power mode: Users allow to assign how much PoE
power for per port and system will reserves PoE power to PD.

LLDP-Consumption mode: System offers PoE power according to PD real
power consumption.

LLDP-Reserved-Power mode: System reserves PoE power to PD
according to LLDP configuration.
 Power Supply Budget
[W]
Set limit value of the total PoE port provided power to the PDs.
NS3702-24P-4S available maximum value is 440.
 Temperature
Threshold
Allows setting over temperature protection threshold value. It system
temperature was over it then system lower total PoE power budget automatically.
 PoE Usage Threshold Allows setting how much PoE power budget could be limited.
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is to
provide information about the maximum power required by the PD during operation. However, to improve power management at
the PSE, the PD provides a signature about Class level.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes.