Interlogix 5150 Series - Manual

503-692-4052
From U.S. and Canada: 800-547-2556
SENTROL , inc
5150-W
Sentrol On-the-Glass Shock Sensors
❒
5150–W
❒
5150–M
❒
5150C–W
❒
5150C–M
Easy Installation and Range Verification
• Mount directly on the glass
• Two wire, self powered, solid state
• Easy mounting with specially
formulated 3M ™ adhesive tape
Applications
The 5150 is rated for all types of glass, without
adjustment. The sensor is rated for plate, wired,
tempered and laminated glass up to 1/4".
Shock sensors are intrusion detection devices
designed to detect a glass break big enough to
reach, crawl, or walk through. Shock sensors aren’t
rated to detect cracks, bullet holes and other small
holes, removing windows, or entry via glass cutting
without breakage. All Glassbreak sensors should be
10'
Maximum Coverage
Walk away with confidence
Strike far opposite
corner of glass with
screwdriver handle
Sensor trips at panel or
keypad verifying range
for entire glass area
Glassbreak
Sensors 5150 Series
Shock Sensors
backed up by interior protection.
Laminated Glass will reduce the specified range.
Test carefully to ensure maximum detection. Armor
coated glass and plexiglass will reduce specified
range by 50%, from a 10' radius to a 5' radius.
This shock sensor is self powered and therefore will
not effect battery life for wireless transmitters.
0 46188 0 6 8 5 1 7
Mount sensor 1" from the
frame
Quantity 5
X
Protected under patent 4,745,398 re. 33,807 and other patents