Interlogix TVC-BIR6-MR-HR - Manual (Page 16)

EN 14
6. Connect a 75 ohm coaxial video cable to
the video cable, and connect a 12 VDC
or 24 VAC power supply to the power
cable.
7. Adjust the camera position and angle as
required.
8. If necessary, use a flat blade screwdriver
to adjust the zoom first, and then adjust
the focus (Figure 3 on page 9).
Specifications
Power supply
24 VAC/12 VDC
Current TVC-BIR6-MR(-P):
180 mA (IR OFF)
590 mA (IR ON)
TVC-BIR6-HR(-P):
180 mA (IR OFF)
630 mA (IR ON)