Interlogix TruVision 360° Installation Manual - Manual (Page 12)

10 Installation Manual
Round angled back box Example: Round angled back box
with camera
TruVision 360° camera cup base (TVF-CBM)
The 360° camera can be installed on a cup base then attached to a TruVision
swan neck bracket (TVD-SNB) for wall mounting, or to a TruVision pendant
(TVD-PPB) for ceiling mounting.
Cup base
Example: Cup base with
wall mount
Example: Cup base with
pendant mount
For further information, please refer to the “TruVision 360° Camera Bracket
Installation Manual”.
Network settings
Use the TruVision Device Finder to find and configure the IP address and other
parameters of the device. This tool automatically identifies TruVision devices on
the network. The TruVision Device Finder tool can be found on the CD shipped
with the camera.
For further information, please refer to the “TruVision 360° Camera Configuration
Manual”.
To install the TruVision Device Finder:
1. Insert the CD in the computer’s CD/DVD drive.