Interlogix TruVision Device Manager - Manual (Page 5)

TruVision Device Manager User Manual 3
Note:
• Click
Refresh to refresh the online device list manually. The newly found
devices will be added to the list.
• Click the button on a column heading to sort the information.
Configure the device over the network
When you move the mouse cursor in the device information panel (Figure 1 on
page 2) onto the IP address of an online device, it will change to a finger shape.
Double-click the IP address to open the device web browser and configure its
setting over the network.
Check basic device information
To check the basic information of a device, select the desired device in the
device panel (Figure 1 on page 2). The information is then displayed in the
Device information panel (see Figure 2 below). It shows the serial number,
firmware version, and MAC address. You cannot change this information.
Figure 2: Device information panel
Modify network parameters
To configure the basic network parameters:
1. In the device panel, select the device to be modified from the list.
2. In the Modify Network Parameters panel, change the following network
parameters: IP address, subnet mask, gateway, and port number.