Interlogix UltraView IP PTZ 36X Camera User Manual User Manual
Page 54
Chapter 5: Motion setup
50
UltraView IP PTZ 36X Camera User Manual
Figure 23: Time task screen
Parameter
Description
Enable time task
Click to enable this time fuinction.
Parking time(s)
Specify the dwell time in seconds. When there is no control signal during
this specified dwell time (such as an alarm), the task scheduled during this
time of day will be carried out.
Task day
Specify the day for the task schedule.
Interval
Up to 10 tasks can be scheduled in a day.
Start and End times
Define the start and end times fo reach task scheduled.
Task type
There are 12 tasks available:
Close
Auto scan. The camera scans left to right and then back again, right to
left.
Frame scan. The camera scans continuously, frame by frame.
Random scan. The camera randomly scans either horizontally or
vertically.
Patrol (preset tour)
Pattern (shadow tour)
Preset
Panorama scan. The camera simultaneously scans horizontally and
vertically.
Dome reboot
Dome adjust
Aux output
Tilt scan. The camera scans up and down.