Interlogix DVR 11 User Manual - Manual (Page 74)

8BChapter 9: Live view
68 TruVision DVR 11 User Manual
Option Description
Enable wizard Define whether the wizard tool starts when the DVR is turned on.
Check the box to enable/disable, and click Apply .
Figure 20: Monitor setup window: More settings
Table 14: Description of the Monitor setup window: More settings
Option Description
Monitor standard The DVR can support NTSC or PAL video output. The video
standard used is auto detected but can be manually changed.
Modify the video standard used to PAL or NTSC, and click Apply .
Output mode Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright,
Gentle, or Vivid, and click
Apply .
Monitor brightness Modify the video output brightness.
Adjust the scroll bar point to the desired level and click Apply .
Event hint Define whether the status icons appear on screen. See “Status
information” on page 57 for more information.
Check the box to enable/disable, and click Apply .
Timebar transparent Define the transparency of the monitor output time bar on screen
relative to the background to make the time bar easier to read.
Check the box to enable/disable, and click Apply .
Enable timebar Define whether the monitor output time bar appears on screen.
Check the box to enable/disable, and click Apply .
Menu timeout Define the time in minutes after which the menu window reverts to
live view mode.
Select a time from the drop-down list, and click Apply .
Mouse pointer speed Modify the speed of the mouse pointer.
Adjust the scroll bar point to the desired level, and click Apply .