Casio XJ-M250 - Manual (Page 6)

6
Projector Overview
This section describes the features of the projector, and explains the functions of the projector and
remote controller keys.
XJ-M140/XJ-M145/XJ-M150/XJ-M155/XJ-M240/XJ-M245/XJ-M250/XJ-M255
z A laser and LED hybrid light source provides high brightness of 2,500 to 3,000 lumens along with
low power consumption and low heat generation.
z A wide selection of input sources:
Analog RGB, composite video, S-video, component video (Y·Cb·Cr, Y·Pb·Pr), and HDMI input
sources are supported.
z Intelligent Brightness Control function (Eco Mode):
The projector senses surrounding light levels and adjusts projection brightness automatically as
required for efficient low-power operation. (Requires “Eco Mode” setting to be set to “On (Auto)”.)
z 3D image projection support:
Projection of a 3D image signal (60Hz/120Hz field sequential protocol) via one of three input
sources (analog RGB, composite video, S-video) is supported.
z Pointer:
The remote controller can be used to select one of a variety of different pointers for use during
projection.
z Direct Power On:
The projector can be configured to turn on automatically and start projecting as soon as it is
plugged into a power outlet.
XJ-M240/XJ-M245/XJ-M250/XJ-M255
z WXGA Resolution:
The XJ-M240/XJ-M245/XJ-M250/XJ-M255 models support WXGA (1280 × 800) resolution for
optimal viewing of content formatted for today’s widescreen displays. This makes it perfect for
projecting images from widescreen notebook PCs and HD video input sources.
Projector Features and Main Functions
* Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in
3D. Also, separately available special software (CASIO 3D Converter) is required to project a 3D
image with the projector when a computer (analog RGB) is the input source.
* 3D image projection is not supported via an HDMI connection or component video connection.
D