Interlogix NX-1710E Addendum - Manual (Page 2)

Tip: Defaults are shown in bold italics.
L OCATION 54 WEIGAND FORMAT 1 – P ARITY T YPE 4
(1 segment of decimal data) This location programs the Partity Type 4 for Weigand Format 1. Available options for this location are 0 = No Parity; 1 = Odd Parity; 2 = Even Parity.
Factory default is 0.
L
OCATION 55 WEIGAND FORMAT 1 – P ARITY M ASK 4
(8 segments of binary data) This location tells which bits to include for the parity count; and includes the parity bits. It is used in conjunction with Location 54 (Parity Type 4). The factory
default is:
Seg 1 Seg 2 Seg 3 Seg 4 Seg 5 Seg 6 Seg 7 Seg 8
-------- -------- -------- -------- -------- -------- -------- --------
L
OCATION 56 WEIGAND FORMAT 1 – P ARITY T YPE 5
(1 segment of decimal data) This location programs the Partity Type 5 for Weigand Format 1. Available options for this location are 0 = No Parity; 1 = Odd Parity; 2 = Even Parity.
Factory default is 0.
L
OCATION 57 WEIGAND FORMAT 1 – P ARITY M ASK 5
(8 segments of binary data) This location tells which bits to include for the parity count; and includes the parity bits. It is used in conjunction with Location 56 (Parity Type 5). The factory
default is:
Seg 1 Seg 2 Seg 3 Seg 4 Seg 5 Seg 6 Seg 7 Seg 8
-------- -------- -------- -------- -------- -------- -------- --------
L
OCATIONS 58 – 70 WEIGAND FORMAT 2 (T ECOM ASC 27 BIT )
These locations contain the programming for Weigand Format 2. Refer to the instructions for Locations 45 – 57 regarding the Bit Descriptors, Parity Types and Parity Masks 1-5. Factory
defaults are in the worksheets.
L
OCATIONS 71 - 83 WEIGAND FORMAT 3 (HID1000)
L
OCATIONS 84 – 96 WEIGAND FORMAT 4 (H10304)
L
OCATIONS 97 - 109 WEIGAND FORMAT 5 (40 BIT W /F ACILITY CODE – C ASI 4001)
L
OCATIONS 110 - 122 WEIGAND FORMAT 6 (40 BIT W / O F ACILITY CODE – C ASI 4002)
L
OCATIONS 123 - 135 WEIGAND FORMAT 7 (U NDEFINED )
L
OCATIONS 136 - 148 WEIGAND FORMAT 8 (U NDEFINED )
PROGRAMMING WORKSHEETS for Locations 44 - 148
SEG DESCRIPTION
LOCATION 44 – CODE ENTRY LOGGING PARTITION
1 Code Entry Logging Partition for Reader “A” Default = 0
2 Code Entry Logging Partition for Reader “B” Default = 0
IMPORTANT: T HE FOLLOWING LOCATIONS ARE CONSIDERED ADVANCED PROGRAMMING AND SHOULD ONLY BE USED BY INSTALLERS WITH A THOROUGH
UNDERSTANDING OF W EIGAND FORMATS . D O NOT ATTEMPT TO PROGRAM THESE LOCATIONS IF YOU ARE NOT FAMILIAR WITH W EIGAND PACKETS .
WEIGAND FORMAT 1
LOCATION 45 – WIEGAND FORMAT 1 (DIGITS & BITS) (DECIMAL DATA)
SEG DESCRIPTION DEFAULT DATA
1 Number of Digits in Facility Code 5
2 Number of Digits in Badge Number 5
3 Number of Bits in Facility Code 8
4 Number of Bits in Badge Number 16
5 Total Number of Bits in Complete Weigand Format (including parity bits) 26
LOCATION 46 – WIEGAND FORMAT 1 (BIT DESCRIPTOR 1 - 32) HEX DATA
0 = Always Zero; 1 = Always One; B = Badge Number Bit; D = Parity Bit; E = End of Format; F = Facility Code Bit
SEG DESCRIPTION DEFAULT DATA SEG DESCRIPTION DEFAULT DATA
1 Bit 1 Descriptor D 17 Bit 17 Descriptor B
2 Bit 2 Descriptor F 18 Bit 18 Descriptor B
3 Bit 3 Descriptor F 19 Bit 19 Descriptor B
4 Bit 4 Descriptor F 20 Bit 20 Descriptor B
5 Bit 5 Descriptor F 21 Bit 21 Descriptor B
6 Bit 6 Descriptor F 22 Bit 22 Descriptor B
7 Bit 7 Descriptor F 23 Bit 23 Descriptor B
8 Bit 8 Descriptor F 24 Bit 24 Descriptor B
9 Bit 9 Descriptor F 25 Bit 25 Descriptor B
10 Bit 10 Descriptor B 26 Bit 26 Descriptor D
11 Bit 11 Descriptor B 27 Bit 27 Descriptor E
12 Bit 12 Descriptor B 28 Bit 28 Descriptor E
13 Bit 13 Descriptor B 29 Bit 29 Descriptor E
14 Bit 14 Descriptor B 30 Bit 30 Descriptor E
15 Bit 15 Descriptor B 31 Bit 31 Descriptor E
16 Bit 16 Descriptor B 32 Bit 32 Descriptor E
LOCATION 47 – WIEGAND FORMAT 1 (BIT DESCRIPTOR 33 - 64)
1 Bit 33 Descriptor E 17 Bit 49 Descriptor E
2 Bit 34 Descriptor E 18 Bit 50 Descriptor E
3 Bit 35 Descriptor E 19 Bit 51 Descriptor E
4 Bit 36 Descriptor E 20 Bit 52 Descriptor E