Cortelco 2757 - Manual (Page 13)

13
5. Press ‘Down’ until ‘7. PPPoE Username’ is selected, and press ‘Select’. You’ll be prompted
to enter a PPPoE username. Use the numeric keypad to input your username.
For example, to enter ‘B’, press ‘2’ rapidly 3 times. The time between each keystroke must
be less than 2 seconds. If the time period is longer than 2 seconds, the cursor will move right
and you can enter a new character. To erase a character, press ‘Clear’.
When you finish entering the PPPoE username, press ‘Save’, or press ‘Cancel’ to discard.
You can input up to 40 characters.
6. Now press ‘Down’ until ‘8. PPPoE Password’ is selected, and press ‘Select’. You will be
prompted to enter a PPPoE password. Use the method described in the previous step to
enter and save your password.