ISP Technologies SP115 - Manual (Page 4)

4
PLACEMENT
The SP115 is designed to sit directly on the floor or stage. Do not position or mount the
cabinet where it can tip over and fall on someone. Do not attempt to mount the cabinet on
speaker stands. Do not attempt to ‘fly’ (suspend by cables, chains, ropes, etc.) the cabinet.
It was not designed for flying. Position it only on a flat, stable surface where it is not in
danger of tipping over.
Also, note that the placement of the cabinet relative to floors and walls will affect the low
frequency response. Placing it closer to the floor and walls will reinforce the low frequency
response.
A pole mount socket is provided on the top of the SP115 for mounting an ISP Active Series
Tripower 12 or Tripower 12XL three-way speaker. A standard 1.5-inch pole is required for
mounting the Tripower speaker. To avoid accidents and insure stability this pole length
should not exceed 2 feet in length.