iStorage diskAshurDT Manual - Manual (Page 16)

www.istorage-uk.com 16
In the Computer Manage window, click 5. Disk Management. In the Disk
Management window, the diskAshur DT is recognized as an unknown device
that is uninitialized and unallocated.
Do the following to make the drive recognized as a basic drive.
6.
If the Initialize and Convert Disk Wizard window opens, click • Cancel,
then initialize the disk manually using the following steps.
a. Right-click Unknown Disk, and then select Initialize Disk.
b. In the Initialize Disk window, click OK.
Right-click in the blank area under the Unallocated section, and then select 7.
New Partition. The Welcome to the New Partition Wizard window opens.
Click
8. Next.
Select Primary partition and click 9. Next.
If you need only one partition, accept the default partition size and click 10. Next.
Click 11. Next.
Create a volume label, select Perform a quick format, and then click 12. Next.
Click 13. Finish.
Wait until the format process is complete. The diskAshur DT will be 14.
recognized and it is available for use.