Philips Magnavox 7P5441C199 - Manual (Page 14)

□
F i : ati ¡ rk M eni C ontrols ( continued )
<X>
ADi)/i)i:Li;n: c hannkls
A uto-Programming (see
previous page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. AddIDelete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV's memory.
Select CHANNEL MEMORY
(ADD/DELETE CHANNELS)
control.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) ^•►buttons.
Then press the MENU button.
<|> Press the CHANNEL AT or
number buttons to select the
channel you want to add or delete.
<P
Press the MENU ^ button to
ADD the channel into the TV's
memory.
Press the MENU button to
DELETE the channel from
memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete.
Press the STATUS or MENU
button to clear the screen when
through.
S maui
Remember. You can also
m add the AUX 1, AUX 2, or
AUX 3 modes just like a channel.
Then by pressing the CHANNEL
AT buttons the AUX(iliary)
mode can quickly be selected to
use the desired set of Input jacks
on the TV (see page 28).
Note: AUX 1, AUX 2, and AUX 3
modes are located between the
lowest and highest channel
numbers within the
ADD/DELETE CHANNEL
control screen.
' FEATURE MENU <
= CHANNEL MEMORY ■
i t\ . I , 1 , 1 ,
AOD/I ,NNEL
m
Channel 19 Added
tor ANT A
SELECT CHANNEL
QD to DELETE CHANNEL
for ANT B
when FINISHED
NOTE: A separate ADD/DELETE CHANNEL memory
may also be cieaed for the ANT(enna) B Input on the
rear of the set (if an Antenna or Cable TV signal has been
connected). Just press the [MCEj button on the remote,
while in the ADD/DELETE CHANNEL mode, to switch
between the ANT A and ANT B channel memory lists.
Then follow steps 2 and 3 as shown to the left to add or
delete the desired channels.
14