Philips CCB 134AT - Manual (Page 21)

Setting the Remote to 0|>erate a Cable BoxIDBS (cant’d) 21
5
Within 30 seconds, press the Number buttons to enter
the two-digit code for your Cable Box/DBS.
For example, if
you have a Zenith Cable Box, press Number buttons 0,7.
6
Repeat step I. If the remote control works your Cable
Box/DBS, you’re finished. If the remote control still doesn’t work
your Cable Box/DBS, repeat steps 2-5, using a different code for
your brand, if available.
5
There is no guarantee
that the remote control
will work your Cable
Box or DBS.
Helpful
Although the remote control that
comes with your TV/VCR will work
most Cable Boxes and DBSs, it is
possible that the remote control will
not operate your Cable Box or DBS.
The remote control may only oper­
ate some features of your Cable
Box or DBS. For example, some
Cable Boxes may only be turned on
at the Cable Box, therefore the
remote control will not be able to
turn on the Cable Box.
Press the CABLE/DBS button before
pressing any buttons to operate the
Cable BoxIDBS.
If you had to program the remote
control to operate your Cable Box or
DBS here, whenever you replace the
batteries in the remote control, you
will have to program the remote
control again.__________________